#32529 enable SPI driver, remove not needed patches

PKGBUILD

@@ -21,7 +21,7 @@ source=("http://www.kernel.org/pub/linux/kernel/v3.x/${_srcname}.tar.xz"
         'CVE-2013-1763.patch')
 md5sums=('1c738edfc54e7c65faeb90c436104e2f'
          '9710fb1b1e08eb1fc5214dc2fb34ebcc'
-         'b2449cb9f5335fc864fe5b0a6330265a'
+         '03b1dad90f3558dba3031901398c1ca4'
          'eb14dcfd80c00852ef81ded6e826826a'
          '9d3c56a4b999c8bfbd4018089a62f662'
          '420991808fe4cba143013427c0737aa9')

config

@@ -1,6 +1,6 @@
 #
 # Automatically generated file; DO NOT EDIT.
-# Linux/i386 3.8.0 Kernel Configuration
+# Linux/i386 3.8.0-2 Kernel Configuration
 #
 # CONFIG_64BIT is not set
 CONFIG_X86_32=y
@@ -1493,6 +1493,9 @@ CONFIG_MTD_PLATRAM=m
 CONFIG_MTD_PMC551=m
 # CONFIG_MTD_PMC551_BUGFIX is not set
 # CONFIG_MTD_PMC551_DEBUG is not set
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SST25L is not set
 # CONFIG_MTD_SLRAM is not set
 CONFIG_MTD_PHRAM=m
 CONFIG_MTD_MTDRAM=m
@@ -1614,6 +1617,7 @@ CONFIG_BLK_DEV_RBD=m
 CONFIG_SENSORS_LIS3LV02D=m
 CONFIG_AD525X_DPOT=m
 CONFIG_AD525X_DPOT_I2C=m
+# CONFIG_AD525X_DPOT_SPI is not set
 # CONFIG_IBM_ASM is not set
 CONFIG_PHANTOM=m
 CONFIG_INTEL_MID_PTI=m
@@ -1635,9 +1639,11 @@ CONFIG_SENSORS_BH1770=m
 CONFIG_SENSORS_APDS990X=m
 CONFIG_HMC6352=m
 CONFIG_DS1682=m
+# CONFIG_TI_DAC7512 is not set
 CONFIG_VMWARE_BALLOON=m
 CONFIG_BMP085=y
 CONFIG_BMP085_I2C=m
+# CONFIG_BMP085_SPI is not set
 # CONFIG_PCH_PHUB is not set
 CONFIG_USB_SWITCH_FSA9480=m
 CONFIG_C2PORT=m
@@ -1647,9 +1653,11 @@ CONFIG_C2PORT_DURAMAR_2150=m
 # EEPROM support
 #
 CONFIG_EEPROM_AT24=m
+# CONFIG_EEPROM_AT25 is not set
 CONFIG_EEPROM_LEGACY=m
 CONFIG_EEPROM_MAX6875=m
 CONFIG_EEPROM_93CX6=m
+# CONFIG_EEPROM_93XX46 is not set
 CONFIG_CB710_CORE=m
 # CONFIG_CB710_DEBUG is not set
 CONFIG_CB710_DEBUG_ASSUMPTIONS=y
@@ -2203,8 +2211,11 @@ CONFIG_MLX4_CORE=m
 CONFIG_MLX4_DEBUG=y
 CONFIG_NET_VENDOR_MICREL=y
 CONFIG_KS8842=m
+# CONFIG_KS8851 is not set
 CONFIG_KS8851_MLL=m
 CONFIG_KSZ884X_PCI=m
+CONFIG_NET_VENDOR_MICROCHIP=y
+# CONFIG_ENC28J60 is not set
 CONFIG_NET_VENDOR_MYRI=y
 CONFIG_MYRI10GE=m
 CONFIG_MYRI10GE_DCA=y
@@ -2323,6 +2334,7 @@ CONFIG_MICREL_PHY=m
 CONFIG_MDIO_BUS_MUX=m
 CONFIG_MDIO_BUS_MUX_GPIO=m
 CONFIG_MDIO_BUS_MUX_MMIOREG=m
+# CONFIG_MICREL_KS8995MA is not set
 CONFIG_PLIP=m
 CONFIG_PPP=m
 CONFIG_PPP_BSDCOMP=m
@@ -2502,6 +2514,7 @@ CONFIG_LIBERTAS=m
 CONFIG_LIBERTAS_USB=m
 CONFIG_LIBERTAS_CS=m
 CONFIG_LIBERTAS_SDIO=m
+# CONFIG_LIBERTAS_SPI is not set
 # CONFIG_LIBERTAS_DEBUG is not set
 CONFIG_LIBERTAS_MESH=y
 CONFIG_HERMES=m
@@ -2517,6 +2530,7 @@ CONFIG_ORINOCO_USB=m
 CONFIG_P54_COMMON=m
 CONFIG_P54_USB=m
 CONFIG_P54_PCI=m
+# CONFIG_P54_SPI is not set
 CONFIG_P54_LEDS=y
 CONFIG_RT2X00=m
 CONFIG_RT2400PCI=m
@@ -2552,10 +2566,12 @@ CONFIG_RTLWIFI=m
 CONFIG_RTL8192C_COMMON=m
 CONFIG_WL_TI=y
 CONFIG_WL1251=m
+# CONFIG_WL1251_SPI is not set
 CONFIG_WL1251_SDIO=m
 CONFIG_WL12XX=m
 CONFIG_WL18XX=m
 CONFIG_WLCORE=m
+# CONFIG_WLCORE_SPI is not set
 CONFIG_WLCORE_SDIO=m
 CONFIG_WL12XX_PLATFORM_DATA=y
 CONFIG_ZD1211RW=m
@@ -2575,6 +2591,8 @@ CONFIG_WIMAX_I2400M_DEBUG_LEVEL=8
 CONFIG_IEEE802154_DRIVERS=m
 CONFIG_IEEE802154_FAKEHARD=m
 CONFIG_IEEE802154_FAKELB=m
+CONFIG_IEEE802154_AT86RF230=m
+# CONFIG_IEEE802154_MRF24J40 is not set
 CONFIG_VMXNET3=m
 CONFIG_HYPERV_NET=m
 CONFIG_ISDN=y
@@ -2830,14 +2848,18 @@ CONFIG_TABLET_USB_HANWANG=m
 CONFIG_TABLET_USB_KBTAB=m
 CONFIG_TABLET_USB_WACOM=m
 CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_ADS7846 is not set
+# CONFIG_TOUCHSCREEN_AD7877 is not set
 CONFIG_TOUCHSCREEN_AD7879=m
 CONFIG_TOUCHSCREEN_AD7879_I2C=m
+# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
 CONFIG_TOUCHSCREEN_ATMEL_MXT=m
 CONFIG_TOUCHSCREEN_AUO_PIXCIR=m
 CONFIG_TOUCHSCREEN_BU21013=m
 CONFIG_TOUCHSCREEN_CY8CTMG110=m
 CONFIG_TOUCHSCREEN_CYTTSP_CORE=m
 CONFIG_TOUCHSCREEN_CYTTSP_I2C=m
+# CONFIG_TOUCHSCREEN_CYTTSP_SPI is not set
 CONFIG_TOUCHSCREEN_DYNAPRO=m
 CONFIG_TOUCHSCREEN_HAMPSHIRE=m
 CONFIG_TOUCHSCREEN_EETI=m
@@ -2888,12 +2910,14 @@ CONFIG_TOUCHSCREEN_USB_NEXIO=y
 CONFIG_TOUCHSCREEN_USB_EASYTOUCH=y
 CONFIG_TOUCHSCREEN_TOUCHIT213=m
 CONFIG_TOUCHSCREEN_TSC_SERIO=m
+# CONFIG_TOUCHSCREEN_TSC2005 is not set
 CONFIG_TOUCHSCREEN_TSC2007=m
 CONFIG_TOUCHSCREEN_ST1232=m
 CONFIG_TOUCHSCREEN_TPS6507X=m
 CONFIG_INPUT_MISC=y
 CONFIG_INPUT_AD714X=m
 CONFIG_INPUT_AD714X_I2C=m
+CONFIG_INPUT_AD714X_SPI=m
 CONFIG_INPUT_BMA150=m
 CONFIG_INPUT_PCSPKR=m
 CONFIG_INPUT_MC13783_PWRBUTTON=m
@@ -2919,6 +2943,7 @@ CONFIG_INPUT_PWM_BEEPER=m
 CONFIG_INPUT_GPIO_ROTARY_ENCODER=m
 CONFIG_INPUT_ADXL34X=m
 CONFIG_INPUT_ADXL34X_I2C=m
+CONFIG_INPUT_ADXL34X_SPI=m
 CONFIG_INPUT_CMA3000=m
 CONFIG_INPUT_CMA3000_I2C=m
 
@@ -2989,6 +3014,8 @@ CONFIG_SERIAL_8250_DW=m
 #
 # Non-8250 serial port support
 #
+# CONFIG_SERIAL_MAX3100 is not set
+# CONFIG_SERIAL_MAX310X is not set
 CONFIG_SERIAL_MFD_HSU=m
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
@@ -3000,6 +3027,7 @@ CONFIG_SERIAL_ALTERA_JTAGUART=m
 CONFIG_SERIAL_ALTERA_UART=m
 CONFIG_SERIAL_ALTERA_UART_MAXPORTS=4
 CONFIG_SERIAL_ALTERA_UART_BAUDRATE=115200
+# CONFIG_SERIAL_IFX6X60 is not set
 CONFIG_SERIAL_PCH_UART=m
 CONFIG_SERIAL_XILINX_PS_UART=m
 CONFIG_SERIAL_ARC=m
@@ -3125,7 +3153,32 @@ CONFIG_SCx200_ACB=m
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_SPI is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_ALTERA is not set
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_BUTTERFLY is not set
+# CONFIG_SPI_GPIO is not set
+# CONFIG_SPI_LM70_LLP is not set
+# CONFIG_SPI_OC_TINY is not set
+# CONFIG_SPI_PXA2XX is not set
+# CONFIG_SPI_PXA2XX_PCI is not set
+# CONFIG_SPI_SC18IS602 is not set
+# CONFIG_SPI_TOPCLIFF_PCH is not set
+# CONFIG_SPI_XCOMM is not set
+# CONFIG_SPI_XILINX is not set
+# CONFIG_SPI_DESIGNWARE is not set
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
 # CONFIG_HSI is not set
 
 #
@@ -3194,7 +3247,10 @@ CONFIG_GPIO_AMD8111=m
 #
 # SPI GPIO expanders:
 #
+# CONFIG_GPIO_MAX7301 is not set
 # CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_GPIO_MC33880 is not set
+# CONFIG_GPIO_74X164 is not set
 
 #
 # AC97 GPIO expanders:
@@ -3241,8 +3297,10 @@ CONFIG_HWMON_VID=m
 #
 CONFIG_SENSORS_ABITUGURU=m
 CONFIG_SENSORS_ABITUGURU3=m
+# CONFIG_SENSORS_AD7314 is not set
 CONFIG_SENSORS_AD7414=m
 CONFIG_SENSORS_AD7418=m
+# CONFIG_SENSORS_ADCXX is not set
 CONFIG_SENSORS_ADM1021=m
 CONFIG_SENSORS_ADM1025=m
 CONFIG_SENSORS_ADM1026=m
@@ -3279,6 +3337,7 @@ CONFIG_SENSORS_IT87=m
 CONFIG_SENSORS_JC42=m
 CONFIG_SENSORS_LINEAGE=m
 CONFIG_SENSORS_LM63=m
+# CONFIG_SENSORS_LM70 is not set
 CONFIG_SENSORS_LM73=m
 CONFIG_SENSORS_LM75=m
 CONFIG_SENSORS_LM77=m
@@ -3296,6 +3355,7 @@ CONFIG_SENSORS_LTC4245=m
 CONFIG_SENSORS_LTC4261=m
 CONFIG_SENSORS_LM95241=m
 CONFIG_SENSORS_LM95245=m
+# CONFIG_SENSORS_MAX1111 is not set
 CONFIG_SENSORS_MAX16065=m
 CONFIG_SENSORS_MAX1619=m
 CONFIG_SENSORS_MAX1668=m
@@ -3335,6 +3395,7 @@ CONFIG_SENSORS_SCH5627=m
 CONFIG_SENSORS_SCH5636=m
 CONFIG_SENSORS_ADS1015=m
 CONFIG_SENSORS_ADS7828=m
+# CONFIG_SENSORS_ADS7871 is not set
 CONFIG_SENSORS_AMC6821=m
 CONFIG_SENSORS_INA2XX=m
 CONFIG_SENSORS_THMC50=m
@@ -3483,18 +3544,25 @@ CONFIG_MFD_LM3533=m
 CONFIG_TPS65010=m
 CONFIG_TPS6507X=m
 CONFIG_MFD_TPS65217=m
+# CONFIG_MFD_TPS65912_SPI is not set
+# CONFIG_MFD_STMPE is not set
 # CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_DA9052_SPI is not set
 CONFIG_MFD_ARIZONA=y
 CONFIG_MFD_ARIZONA_I2C=m
+# CONFIG_MFD_ARIZONA_SPI is not set
 CONFIG_MFD_WM5102=y
 CONFIG_MFD_WM5110=y
+# CONFIG_MFD_WM831X_SPI is not set
 CONFIG_MFD_PCF50633=m
 CONFIG_PCF50633_ADC=m
 CONFIG_PCF50633_GPIO=m
 CONFIG_MFD_MC13783=m
 CONFIG_MFD_MC13XXX=m
+# CONFIG_MFD_MC13XXX_SPI is not set
 CONFIG_MFD_MC13XXX_I2C=m
 CONFIG_ABX500_CORE=y
+# CONFIG_EZX_PCAP is not set
 CONFIG_MFD_CS5535=m
 # CONFIG_MFD_TIMBERDALE is not set
 CONFIG_LPC_SCH=m
@@ -4206,7 +4274,16 @@ CONFIG_FB_VIRTUAL=m
 # CONFIG_EXYNOS_VIDEO is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_LCD_CLASS_DEVICE=m
+# CONFIG_LCD_L4F00242T03 is not set
+# CONFIG_LCD_LMS283GF05 is not set
+# CONFIG_LCD_LTV350QV is not set
+# CONFIG_LCD_ILI9320 is not set
+# CONFIG_LCD_TDO24M is not set
+# CONFIG_LCD_VGG2432A4 is not set
 CONFIG_LCD_PLATFORM=m
+# CONFIG_LCD_S6E63M0 is not set
+# CONFIG_LCD_LD9040 is not set
+# CONFIG_LCD_AMS369FG06 is not set
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
 # CONFIG_BACKLIGHT_GENERIC is not set
 CONFIG_BACKLIGHT_LM3533=m
@@ -4429,6 +4506,7 @@ CONFIG_SND_VIA82XX_MODEM=m
 CONFIG_SND_VIRTUOSO=m
 CONFIG_SND_VX222=m
 CONFIG_SND_YMFPCI=m
+CONFIG_SND_SPI=y
 CONFIG_SND_USB=y
 CONFIG_SND_USB_AUDIO=m
 CONFIG_SND_USB_UA101=m
@@ -4880,6 +4958,7 @@ CONFIG_LEDS_LP5523=m
 CONFIG_LEDS_CLEVO_MAIL=m
 CONFIG_LEDS_PCA955X=m
 CONFIG_LEDS_PCA9633=m
+# CONFIG_LEDS_DAC124S085 is not set
 CONFIG_LEDS_BD2802=m
 CONFIG_LEDS_INTEL_SS4200=m
 CONFIG_LEDS_LT3593=m
@@ -4973,6 +5052,15 @@ CONFIG_RTC_DRV_RV3029C2=m
 #
 # SPI RTC drivers
 #
+# CONFIG_RTC_DRV_M41T93 is not set
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
 
 #
 # Platform RTC drivers

config.x86_64

@@ -1,6 +1,6 @@
 #
 # Automatically generated file; DO NOT EDIT.
-# Linux/x86_64 3.8.0 Kernel Configuration
+# Linux/x86_64 3.8.0-2 Kernel Configuration
 #
 CONFIG_64BIT=y
 CONFIG_X86_64=y
@@ -1460,6 +1460,9 @@ CONFIG_MTD_PLATRAM=m
 CONFIG_MTD_PMC551=m
 # CONFIG_MTD_PMC551_BUGFIX is not set
 # CONFIG_MTD_PMC551_DEBUG is not set
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SST25L is not set
 # CONFIG_MTD_SLRAM is not set
 CONFIG_MTD_PHRAM=m
 CONFIG_MTD_MTDRAM=m
@@ -1562,6 +1565,7 @@ CONFIG_BLK_DEV_RBD=m
 CONFIG_SENSORS_LIS3LV02D=m
 CONFIG_AD525X_DPOT=m
 CONFIG_AD525X_DPOT_I2C=m
+# CONFIG_AD525X_DPOT_SPI is not set
 # CONFIG_IBM_ASM is not set
 CONFIG_PHANTOM=m
 CONFIG_INTEL_MID_PTI=m
@@ -1583,9 +1587,11 @@ CONFIG_SENSORS_BH1770=m
 CONFIG_SENSORS_APDS990X=m
 CONFIG_HMC6352=m
 CONFIG_DS1682=m
+# CONFIG_TI_DAC7512 is not set
 CONFIG_VMWARE_BALLOON=m
 CONFIG_BMP085=y
 CONFIG_BMP085_I2C=m
+# CONFIG_BMP085_SPI is not set
 CONFIG_PCH_PHUB=m
 CONFIG_USB_SWITCH_FSA9480=m
 CONFIG_C2PORT=m
@@ -1595,9 +1601,11 @@ CONFIG_C2PORT_DURAMAR_2150=m
 # EEPROM support
 #
 CONFIG_EEPROM_AT24=m
+# CONFIG_EEPROM_AT25 is not set
 CONFIG_EEPROM_LEGACY=m
 CONFIG_EEPROM_MAX6875=m
 CONFIG_EEPROM_93CX6=m
+# CONFIG_EEPROM_93XX46 is not set
 CONFIG_CB710_CORE=m
 # CONFIG_CB710_DEBUG is not set
 CONFIG_CB710_DEBUG_ASSUMPTIONS=y
@@ -2108,8 +2116,11 @@ CONFIG_MLX4_CORE=m
 CONFIG_MLX4_DEBUG=y
 CONFIG_NET_VENDOR_MICREL=y
 CONFIG_KS8842=m
+# CONFIG_KS8851 is not set
 CONFIG_KS8851_MLL=m
 CONFIG_KSZ884X_PCI=m
+CONFIG_NET_VENDOR_MICROCHIP=y
+# CONFIG_ENC28J60 is not set
 CONFIG_NET_VENDOR_MYRI=y
 CONFIG_MYRI10GE=m
 CONFIG_MYRI10GE_DCA=y
@@ -2215,6 +2226,7 @@ CONFIG_STE10XP=m
 CONFIG_LSI_ET1011C_PHY=m
 CONFIG_MICREL_PHY=m
 # CONFIG_MDIO_BITBANG is not set
+# CONFIG_MICREL_KS8995MA is not set
 CONFIG_PLIP=m
 CONFIG_PPP=m
 CONFIG_PPP_BSDCOMP=m
@@ -2394,6 +2406,7 @@ CONFIG_LIBERTAS=m
 CONFIG_LIBERTAS_USB=m
 CONFIG_LIBERTAS_CS=m
 CONFIG_LIBERTAS_SDIO=m
+# CONFIG_LIBERTAS_SPI is not set
 # CONFIG_LIBERTAS_DEBUG is not set
 CONFIG_LIBERTAS_MESH=y
 CONFIG_HERMES=m
@@ -2409,6 +2422,7 @@ CONFIG_ORINOCO_USB=m
 CONFIG_P54_COMMON=m
 CONFIG_P54_USB=m
 CONFIG_P54_PCI=m
+# CONFIG_P54_SPI is not set
 CONFIG_P54_LEDS=y
 CONFIG_RT2X00=m
 CONFIG_RT2400PCI=m
@@ -2444,10 +2458,12 @@ CONFIG_RTLWIFI=m
 CONFIG_RTL8192C_COMMON=m
 CONFIG_WL_TI=y
 CONFIG_WL1251=m
+# CONFIG_WL1251_SPI is not set
 CONFIG_WL1251_SDIO=m
 CONFIG_WL12XX=m
 CONFIG_WL18XX=m
 CONFIG_WLCORE=m
+# CONFIG_WLCORE_SPI is not set
 CONFIG_WLCORE_SDIO=m
 CONFIG_WL12XX_PLATFORM_DATA=y
 CONFIG_ZD1211RW=m
@@ -2467,6 +2483,8 @@ CONFIG_WIMAX_I2400M_DEBUG_LEVEL=8
 CONFIG_IEEE802154_DRIVERS=m
 CONFIG_IEEE802154_FAKEHARD=m
 CONFIG_IEEE802154_FAKELB=m
+CONFIG_IEEE802154_AT86RF230=m
+# CONFIG_IEEE802154_MRF24J40 is not set
 CONFIG_XEN_NETDEV_FRONTEND=m
 CONFIG_XEN_NETDEV_BACKEND=m
 CONFIG_VMXNET3=m
@@ -2703,14 +2721,18 @@ CONFIG_TABLET_USB_HANWANG=m
 CONFIG_TABLET_USB_KBTAB=m
 CONFIG_TABLET_USB_WACOM=m
 CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_ADS7846 is not set
+# CONFIG_TOUCHSCREEN_AD7877 is not set
 CONFIG_TOUCHSCREEN_AD7879=m
 CONFIG_TOUCHSCREEN_AD7879_I2C=m
+# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
 CONFIG_TOUCHSCREEN_ATMEL_MXT=m
 CONFIG_TOUCHSCREEN_AUO_PIXCIR=m
 CONFIG_TOUCHSCREEN_BU21013=m
 CONFIG_TOUCHSCREEN_CY8CTMG110=m
 CONFIG_TOUCHSCREEN_CYTTSP_CORE=m
 CONFIG_TOUCHSCREEN_CYTTSP_I2C=m
+# CONFIG_TOUCHSCREEN_CYTTSP_SPI is not set
 CONFIG_TOUCHSCREEN_DYNAPRO=m
 CONFIG_TOUCHSCREEN_HAMPSHIRE=m
 CONFIG_TOUCHSCREEN_EETI=m
@@ -2759,12 +2781,14 @@ CONFIG_TOUCHSCREEN_USB_NEXIO=y
 CONFIG_TOUCHSCREEN_USB_EASYTOUCH=y
 CONFIG_TOUCHSCREEN_TOUCHIT213=m
 CONFIG_TOUCHSCREEN_TSC_SERIO=m
+# CONFIG_TOUCHSCREEN_TSC2005 is not set
 CONFIG_TOUCHSCREEN_TSC2007=m
 CONFIG_TOUCHSCREEN_ST1232=m
 CONFIG_TOUCHSCREEN_TPS6507X=m
 CONFIG_INPUT_MISC=y
 CONFIG_INPUT_AD714X=m
 CONFIG_INPUT_AD714X_I2C=m
+CONFIG_INPUT_AD714X_SPI=m
 CONFIG_INPUT_BMA150=m
 CONFIG_INPUT_PCSPKR=m
 CONFIG_INPUT_MC13783_PWRBUTTON=m
@@ -2788,6 +2812,7 @@ CONFIG_INPUT_PCF8574=m
 CONFIG_INPUT_GPIO_ROTARY_ENCODER=m
 CONFIG_INPUT_ADXL34X=m
 CONFIG_INPUT_ADXL34X_I2C=m
+CONFIG_INPUT_ADXL34X_SPI=m
 CONFIG_INPUT_CMA3000=m
 CONFIG_INPUT_CMA3000_I2C=m
 CONFIG_INPUT_XEN_KBDDEV_FRONTEND=m
@@ -2858,6 +2883,8 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 #
 # Non-8250 serial port support
 #
+# CONFIG_SERIAL_MAX3100 is not set
+# CONFIG_SERIAL_MAX310X is not set
 CONFIG_SERIAL_MFD_HSU=m
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
@@ -2868,6 +2895,7 @@ CONFIG_SERIAL_ALTERA_JTAGUART=m
 CONFIG_SERIAL_ALTERA_UART=m
 CONFIG_SERIAL_ALTERA_UART_MAXPORTS=4
 CONFIG_SERIAL_ALTERA_UART_BAUDRATE=115200
+# CONFIG_SERIAL_IFX6X60 is not set
 CONFIG_SERIAL_PCH_UART=m
 CONFIG_SERIAL_ARC=m
 CONFIG_SERIAL_ARC_NR_PORTS=1
@@ -2987,7 +3015,31 @@ CONFIG_I2C_VIPERBOARD=m
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_SPI is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_ALTERA is not set
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_BUTTERFLY is not set
+# CONFIG_SPI_GPIO is not set
+# CONFIG_SPI_LM70_LLP is not set
+# CONFIG_SPI_OC_TINY is not set
+# CONFIG_SPI_PXA2XX_PCI is not set
+# CONFIG_SPI_SC18IS602 is not set
+# CONFIG_SPI_TOPCLIFF_PCH is not set
+# CONFIG_SPI_XCOMM is not set
+# CONFIG_SPI_XILINX is not set
+# CONFIG_SPI_DESIGNWARE is not set
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
 # CONFIG_HSI is not set
 
 #
@@ -3053,7 +3105,10 @@ CONFIG_GPIO_LANGWELL=y
 #
 # SPI GPIO expanders:
 #
+# CONFIG_GPIO_MAX7301 is not set
 # CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_GPIO_MC33880 is not set
+# CONFIG_GPIO_74X164 is not set
 
 #
 # AC97 GPIO expanders:
@@ -3098,8 +3153,10 @@ CONFIG_HWMON_VID=m
 #
 CONFIG_SENSORS_ABITUGURU=m
 CONFIG_SENSORS_ABITUGURU3=m
+# CONFIG_SENSORS_AD7314 is not set
 CONFIG_SENSORS_AD7414=m
 CONFIG_SENSORS_AD7418=m
+# CONFIG_SENSORS_ADCXX is not set
 CONFIG_SENSORS_ADM1021=m
 CONFIG_SENSORS_ADM1025=m
 CONFIG_SENSORS_ADM1026=m
@@ -3136,6 +3193,7 @@ CONFIG_SENSORS_IT87=m
 CONFIG_SENSORS_JC42=m
 CONFIG_SENSORS_LINEAGE=m
 CONFIG_SENSORS_LM63=m
+# CONFIG_SENSORS_LM70 is not set
 CONFIG_SENSORS_LM73=m
 CONFIG_SENSORS_LM75=m
 CONFIG_SENSORS_LM77=m
@@ -3153,6 +3211,7 @@ CONFIG_SENSORS_LTC4245=m
 CONFIG_SENSORS_LTC4261=m
 CONFIG_SENSORS_LM95241=m
 CONFIG_SENSORS_LM95245=m
+# CONFIG_SENSORS_MAX1111 is not set
 CONFIG_SENSORS_MAX16065=m
 CONFIG_SENSORS_MAX1619=m
 CONFIG_SENSORS_MAX1668=m
@@ -3192,6 +3251,7 @@ CONFIG_SENSORS_SCH5627=m
 CONFIG_SENSORS_SCH5636=m
 CONFIG_SENSORS_ADS1015=m
 CONFIG_SENSORS_ADS7828=m
+# CONFIG_SENSORS_ADS7871 is not set
 CONFIG_SENSORS_AMC6821=m
 CONFIG_SENSORS_INA2XX=m
 CONFIG_SENSORS_THMC50=m
@@ -3333,18 +3393,25 @@ CONFIG_MFD_LM3533=m
 CONFIG_TPS65010=m
 CONFIG_TPS6507X=m
 CONFIG_MFD_TPS65217=m
+# CONFIG_MFD_TPS65912_SPI is not set
+# CONFIG_MFD_STMPE is not set
 # CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_DA9052_SPI is not set
 CONFIG_MFD_ARIZONA=y
 CONFIG_MFD_ARIZONA_I2C=m
+# CONFIG_MFD_ARIZONA_SPI is not set
 CONFIG_MFD_WM5102=y
 CONFIG_MFD_WM5110=y
+# CONFIG_MFD_WM831X_SPI is not set
 CONFIG_MFD_PCF50633=m
 CONFIG_PCF50633_ADC=m
 CONFIG_PCF50633_GPIO=m
 CONFIG_MFD_MC13783=m
 CONFIG_MFD_MC13XXX=m
+# CONFIG_MFD_MC13XXX_SPI is not set
 CONFIG_MFD_MC13XXX_I2C=m
 CONFIG_ABX500_CORE=y
+# CONFIG_EZX_PCAP is not set
 CONFIG_MFD_CS5535=m
 # CONFIG_MFD_TIMBERDALE is not set
 CONFIG_LPC_SCH=m
@@ -4045,7 +4112,16 @@ CONFIG_XEN_FBDEV_FRONTEND=m
 # CONFIG_EXYNOS_VIDEO is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_LCD_CLASS_DEVICE=m
+# CONFIG_LCD_L4F00242T03 is not set
+# CONFIG_LCD_LMS283GF05 is not set
+# CONFIG_LCD_LTV350QV is not set
+# CONFIG_LCD_ILI9320 is not set
+# CONFIG_LCD_TDO24M is not set
+# CONFIG_LCD_VGG2432A4 is not set
 CONFIG_LCD_PLATFORM=m
+# CONFIG_LCD_S6E63M0 is not set
+# CONFIG_LCD_LD9040 is not set
+# CONFIG_LCD_AMS369FG06 is not set
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
 # CONFIG_BACKLIGHT_GENERIC is not set
 CONFIG_BACKLIGHT_LM3533=m
@@ -4227,6 +4303,7 @@ CONFIG_SND_VIA82XX_MODEM=m
 CONFIG_SND_VIRTUOSO=m
 CONFIG_SND_VX222=m
 CONFIG_SND_YMFPCI=m
+CONFIG_SND_SPI=y
 CONFIG_SND_USB=y
 CONFIG_SND_USB_AUDIO=m
 CONFIG_SND_USB_UA101=m
@@ -4637,6 +4714,7 @@ CONFIG_MMC_SDHCI_ACPI=m
 CONFIG_MMC_SDHCI_PLTFM=m
 CONFIG_MMC_WBSD=m
 CONFIG_MMC_TIFM_SD=m
+# CONFIG_MMC_SPI is not set
 CONFIG_MMC_SDRICOH_CS=m
 CONFIG_MMC_CB710=m
 CONFIG_MMC_VIA_SDMMC=m
@@ -4677,6 +4755,7 @@ CONFIG_LEDS_LP5523=m
 CONFIG_LEDS_CLEVO_MAIL=m
 CONFIG_LEDS_PCA955X=m
 CONFIG_LEDS_PCA9633=m
+# CONFIG_LEDS_DAC124S085 is not set
 CONFIG_LEDS_BD2802=m
 CONFIG_LEDS_INTEL_SS4200=m
 CONFIG_LEDS_LT3593=m
@@ -4768,6 +4847,15 @@ CONFIG_RTC_DRV_RV3029C2=m
 #
 # SPI RTC drivers
 #
+# CONFIG_RTC_DRV_M41T93 is not set
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
 
 #
 # Platform RTC drivers

drm-fix-track-free-areas-3.7.patch

@@ -1,153 +0,0 @@
-From 9ff0ab9881bd47f7d8a95c07a2fa61f594a91d0a Mon Sep 17 00:00:00 2001
-From: Chris Wilson <chris@chris-wilson.co.uk>
-Date: Sun, 16 Dec 2012 16:15:00 +0000
-Subject: [PATCH] drm: Only evict the blocks required to create the requested
- hole
-
-Avoid clobbering adjacent blocks if they happen to expire earlier and
-amalgamate together to form the requested hole.
-
-In passing this fixes a regression from
-commit ea7b1dd44867e9cd6bac67e7c9fc3f128b5b255c
-Author: Daniel Vetter <daniel.vetter@ffwll.ch>
-Date:   Fri Feb 18 17:59:12 2011 +0100
-
-    drm: mm: track free areas implicitly
-
-which swaps the end address for size (with a potential overflow) and
-effectively causes the eviction code to clobber almost all earlier
-buffers above the evictee.
-
-v2: Check the original hole not the adjusted as the coloring may confuse
-us when later searching for the overlapping nodes. Also make sure that
-we do apply the range restriction and color adjustment in the same
-order for both scanning, searching and insertion.
-
-Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
-Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
----
- drivers/gpu/drm/drm_mm.c |   45 +++++++++++++++++----------------------------
- include/drm/drm_mm.h     |    2 +-
- 2 files changed, 18 insertions(+), 29 deletions(-)
-
-diff --git a/drivers/gpu/drm/drm_mm.c b/drivers/gpu/drm/drm_mm.c
-index 0761a03..665553c 100644
---- a/drivers/gpu/drm/drm_mm.c
-+++ b/drivers/gpu/drm/drm_mm.c
-@@ -213,11 +213,13 @@ static void drm_mm_insert_helper_range(struct drm_mm_node *hole_node,
- 
- 	BUG_ON(!hole_node->hole_follows || node->allocated);
- 
--	if (mm->color_adjust)
--		mm->color_adjust(hole_node, color, &adj_start, &adj_end);
--
- 	if (adj_start < start)
- 		adj_start = start;
-+	if (adj_end > end)
-+		adj_end = end;
-+
-+	if (mm->color_adjust)
-+		mm->color_adjust(hole_node, color, &adj_start, &adj_end);
- 
- 	if (alignment) {
- 		unsigned tmp = adj_start % alignment;
-@@ -489,7 +491,7 @@ void drm_mm_init_scan(struct drm_mm *mm,
- 	mm->scan_size = size;
- 	mm->scanned_blocks = 0;
- 	mm->scan_hit_start = 0;
--	mm->scan_hit_size = 0;
-+	mm->scan_hit_end = 0;
- 	mm->scan_check_range = 0;
- 	mm->prev_scanned_node = NULL;
- }
-@@ -516,7 +518,7 @@ void drm_mm_init_scan_with_range(struct drm_mm *mm,
- 	mm->scan_size = size;
- 	mm->scanned_blocks = 0;
- 	mm->scan_hit_start = 0;
--	mm->scan_hit_size = 0;
-+	mm->scan_hit_end = 0;
- 	mm->scan_start = start;
- 	mm->scan_end = end;
- 	mm->scan_check_range = 1;
-@@ -535,8 +537,7 @@ int drm_mm_scan_add_block(struct drm_mm_node *node)
- 	struct drm_mm *mm = node->mm;
- 	struct drm_mm_node *prev_node;
- 	unsigned long hole_start, hole_end;
--	unsigned long adj_start;
--	unsigned long adj_end;
-+	unsigned long adj_start, adj_end;
- 
- 	mm->scanned_blocks++;
- 
-@@ -553,14 +554,8 @@ int drm_mm_scan_add_block(struct drm_mm_node *node)
- 	node->node_list.next = &mm->prev_scanned_node->node_list;
- 	mm->prev_scanned_node = node;
- 
--	hole_start = drm_mm_hole_node_start(prev_node);
--	hole_end = drm_mm_hole_node_end(prev_node);
--
--	adj_start = hole_start;
--	adj_end = hole_end;
--
--	if (mm->color_adjust)
--		mm->color_adjust(prev_node, mm->scan_color, &adj_start, &adj_end);
-+	adj_start = hole_start = drm_mm_hole_node_start(prev_node);
-+	adj_end = hole_end = drm_mm_hole_node_end(prev_node);
- 
- 	if (mm->scan_check_range) {
- 		if (adj_start < mm->scan_start)
-@@ -569,11 +564,14 @@ int drm_mm_scan_add_block(struct drm_mm_node *node)
- 			adj_end = mm->scan_end;
- 	}
- 
-+	if (mm->color_adjust)
-+		mm->color_adjust(prev_node, mm->scan_color,
-+				 &adj_start, &adj_end);
-+
- 	if (check_free_hole(adj_start, adj_end,
- 			    mm->scan_size, mm->scan_alignment)) {
- 		mm->scan_hit_start = hole_start;
--		mm->scan_hit_size = hole_end;
--
-+		mm->scan_hit_end = hole_end;
- 		return 1;
- 	}
- 
-@@ -609,19 +607,10 @@ int drm_mm_scan_remove_block(struct drm_mm_node *node)
- 			       node_list);
- 
- 	prev_node->hole_follows = node->scanned_preceeds_hole;
--	INIT_LIST_HEAD(&node->node_list);
- 	list_add(&node->node_list, &prev_node->node_list);
- 
--	/* Only need to check for containement because start&size for the
--	 * complete resulting free block (not just the desired part) is
--	 * stored. */
--	if (node->start >= mm->scan_hit_start &&
--	    node->start + node->size
--	    		<= mm->scan_hit_start + mm->scan_hit_size) {
--		return 1;
--	}
--
--	return 0;
-+	 return (drm_mm_hole_node_end(node) > mm->scan_hit_start &&
-+		 node->start < mm->scan_hit_end);
- }
- EXPORT_SYMBOL(drm_mm_scan_remove_block);
- 
-diff --git a/include/drm/drm_mm.h b/include/drm/drm_mm.h
-index 06d7f79..a1b66b7 100644
---- a/include/drm/drm_mm.h
-+++ b/include/drm/drm_mm.h
-@@ -70,7 +70,7 @@ struct drm_mm {
- 	unsigned long scan_color;
- 	unsigned long scan_size;
- 	unsigned long scan_hit_start;
--	unsigned scan_hit_size;
-+	unsigned long scan_hit_end;
- 	unsigned scanned_blocks;
- 	unsigned long scan_start;
- 	unsigned long scan_end;
--- 
-1.7.10.4
-

fix-watchdog-3.7.patch

@@ -1,38 +0,0 @@
-X-Git-Url: http://git.kernel.org/?p=linux%2Fkernel%2Fgit%2Ftorvalds%2Flinux.git;a=blobdiff_plain;f=kernel%2Fwatchdog.c;h=75a2ab3d0b0208dfa51e40339ffd00206622732e;hp=997c6a16ec2278969a10f251f63f237e7559d42e;hb=3935e89505a1c3ab3f3b0c7ef0eae54124f48905;hpb=74779e22261172ea728b989310f6ecc991b57d62
-
-diff --git a/kernel/watchdog.c b/kernel/watchdog.c
-index 997c6a1..75a2ab3 100644
---- a/kernel/watchdog.c
-+++ b/kernel/watchdog.c
-@@ -344,6 +344,10 @@ static void watchdog_enable(unsigned int cpu)
- {
- 	struct hrtimer *hrtimer = &__raw_get_cpu_var(watchdog_hrtimer);
- 
-+	/* kick off the timer for the hardlockup detector */
-+	hrtimer_init(hrtimer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
-+	hrtimer->function = watchdog_timer_fn;
-+
- 	if (!watchdog_enabled) {
- 		kthread_park(current);
- 		return;
-@@ -352,10 +356,6 @@ static void watchdog_enable(unsigned int cpu)
- 	/* Enable the perf event */
- 	watchdog_nmi_enable(cpu);
- 
--	/* kick off the timer for the hardlockup detector */
--	hrtimer_init(hrtimer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
--	hrtimer->function = watchdog_timer_fn;
--
- 	/* done here because hrtimer_start can only pin to smp_processor_id() */
- 	hrtimer_start(hrtimer, ns_to_ktime(sample_period),
- 		      HRTIMER_MODE_REL_PINNED);
-@@ -369,9 +369,6 @@ static void watchdog_disable(unsigned int cpu)
- {
- 	struct hrtimer *hrtimer = &__raw_get_cpu_var(watchdog_hrtimer);
- 
--	if (!watchdog_enabled)
--		return;
--
- 	watchdog_set_prio(SCHED_NORMAL, 0);
- 	hrtimer_cancel(hrtimer);
- 	/* disable the perf event */